OC'ing

Vap0r · 12-09-2003, 04:19 PM

Gonna overclock my 2400XP, stock is 2 ghz, I have all aircooled with 6 fans, what is the recommendation that i should go up to without explosions and any tips, I'm quite new to this tweaking business?

HSantal · 12-09-2003, 05:16 PM

Spectre, paging Spectre.

NothingMore. · 12-09-2003, 05:20 PM

Offence chamber?

...

Err..

NS thing

Cobra · 12-09-2003, 05:22 PM

Quote:

Originally Posted by HSantal'

Spectre, paging Spectre.

hehe...I think he is getting burnt out!

12-09-2003, 07:13 PM

Quote:

Originally Posted by Cobra

Quote:

Originally Posted by HSantal'

Spectre, paging Spectre.

hehe...I think he is getting burnt out!

NO FREAKING WAY !!! I'm just hitting my stride !

Vapor...I need :

Motherboard type

Ram type and amount and number of sticks

Power supply information

CPU information

CPU Heatsink type and type of fan

Current temps

**Overlag** · 12-09-2003, 07:27 PM

indeed.

keep it under 60c
i think he has an Nforce2 setup
2400 is 133fsb bus isnt it?
2400 is locked at default multi

12-09-2003, 07:30 PM

I know a special unlocking trick...however i doubt Vapor has the bullocks to place a wire in his CPU socket and then press the CPU on top of it, therefore unlocking the multiplier.

The wire trick would unlock his FSB options and ALL multipliers.

We'll see.

**Overlag** · 12-09-2003, 07:37 PM

i just use a conductive paint on the MB or, if i CBA to take the board out, i do it on the CPU pins..the later is harder

**Overlag** · 12-09-2003, 08:00 PM

**** man i just had the fright of my life....

i tried 233fsb while using /12 CPU speed for mem (197mhz i think it was)

booted fine... ran a few tests of prime (about 5minutes) then started 3dmark...BAMMMMMMM locks hard

reboot

R300 BIOS reflash tool came up

and the bios for system settings kept crashing also

first time ive **** myself for ages... lol

=Sarc= · 12-09-2003, 09:34 PM

The wire trick isn't that hard to unlock the multiplier. I find it was much easier than using conductive paint. Just find the right holes and stick a wire in it, then the CPU on top of that.

12-09-2003, 11:42 PM

Quote:

Originally Posted by =Sarc=

The wire trick isn't that hard to unlock the multiplier. I find it was much easier than using conductive paint. Just find the right holes and stick a wire in it, then the CPU on top of that.

I gave you the diagram didn't I??? Or did I mark the proper holes and give you the 22 Gauge brass wire???

=Sarc= · 12-10-2003, 07:26 AM

You marked the holes with black marker. It couldn't be clearer than that! Even without the marker, it's not hard for somebody to look at the picture and the socket to match up the holes.

Vap0r · 12-10-2003, 08:35 AM

Ok So i got,

MSI K7N2L,
1 x 512MB 2700 Crucial RAM,
550W Dual cooled PSUm
Athlon XP2400+ All stock settings,

Coolermaster HHC-001 & stock fan (http://www.frostytech.com/articleview.cfm?articleID=1128)

Gonna buy some arctic silver 5

Case is cooled by 2 intake, 2 exhaust YSTECH 80mm fans

Don't know temps.....

Vap0r · 12-10-2003, 08:56 AM

Edit: According to MBM5, I'm at 59 degrees cpu and i'm virtually idle :s

Cobra · 12-10-2003, 10:53 AM

I want to see that diagram!

12-09-2003, 04:19 PM	#1 (permalink)
Vap0r Join Date: May 2003 Posts: 310	OC'ing Gonna overclock my 2400XP, stock is 2 ghz, I have all aircooled with 6 fans, what is the recommendation that i should go up to without explosions and any tips, I'm quite new to this tweaking business?

12-09-2003, 05:16 PM	#2 (permalink)
HSantal Join Date: May 2003 Location: Ontario, Canada Age: 52 Posts: 1,005	Spectre, paging Spectre. __________________ I do what I can. cpgf: (n.) Acronym describing a significant other who has not yet acheived full spousal status and is in possession of a cable modem; of note because at YOUR house, you still have dial-up -- and crappy dialup at that.

12-09-2003, 05:20 PM	#3 (permalink)
NothingMore. Join Date: May 2003 Location: Where ever I really want to be. Posts: 1,007	Offence chamber? ... Err.. NS thing __________________ - 52

12-09-2003, 07:27 PM	#6 (permalink)
Overlag Join Date: May 2003 Location: NE Outer London, UK Age: 26 Posts: 1,540	indeed. keep it under 60c i think he has an Nforce2 setup 2400 is 133fsb bus isnt it? 2400 is locked at default multi __________________ From Adam Webb

12-09-2003, 07:37 PM	#8 (permalink)
Overlag Join Date: May 2003 Location: NE Outer London, UK Age: 26 Posts: 1,540	i just use a conductive paint on the MB or, if i CBA to take the board out, i do it on the CPU pins..the later is harder __________________ From Adam Webb

12-09-2003, 07:30 PM	#7 (permalink)
Spectre Guest Posts: n/a	I know a special unlocking trick...however i doubt Vapor has the bullocks to place a wire in his CPU socket and then press the CPU on top of it, therefore unlocking the multiplier. The wire trick would unlock his FSB options and ALL multipliers. We'll see.

12-09-2003, 08:00 PM	#9 (permalink)
Overlag Join Date: May 2003 Location: NE Outer London, UK Age: 26 Posts: 1,540	** man i just had the fright of my life.... i tried 233fsb while using /12 CPU speed for mem (197mhz i think it was) booted fine... ran a few tests of prime (about 5minutes) then started 3dmark...BAMMMMMMM locks hard reboot R300 BIOS reflash tool came up and the bios for system settings kept crashing also first time ive ** myself for ages... lol __________________ From Adam Webb

12-09-2003, 09:34 PM	#10 (permalink)
=Sarc= Join Date: May 2003 Location: Ottawa, Canada Posts: 4,428	The wire trick isn't that hard to unlock the multiplier. I find it was much easier than using conductive paint. Just find the right holes and stick a wire in it, then the CPU on top of that. __________________ JO Guides & Tutorials Team Element - It's who you game with.

12-10-2003, 07:26 AM	#12 (permalink)
=Sarc= Join Date: May 2003 Location: Ottawa, Canada Posts: 4,428	You marked the holes with black marker. It couldn't be clearer than that! Even without the marker, it's not hard for somebody to look at the picture and the socket to match up the holes. __________________ JO Guides & Tutorials Team Element - It's who you game with.

12-10-2003, 08:35 AM	#13 (permalink)
Vap0r Join Date: May 2003 Posts: 310	Ok So i got, MSI K7N2L, 1 x 512MB 2700 Crucial RAM, 550W Dual cooled PSUm Athlon XP2400+ All stock settings, Coolermaster HHC-001 & stock fan (http://www.frostytech.com/articleview.cfm?articleID=1128) Gonna buy some arctic silver 5 Case is cooled by 2 intake, 2 exhaust YSTECH 80mm fans Don't know temps.....

12-10-2003, 08:56 AM	#14 (permalink)
Vap0r Join Date: May 2003 Posts: 310	Edit: According to MBM5, I'm at 59 degrees cpu and i'm virtually idle :s

12-10-2003, 10:53 AM	#15 (permalink)
Cobra Join Date: May 2003 Location: Mesa Age: 31 Posts: 692	I want to see that diagram!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Sponsored links

Sponsored links

Sponsored links