help installing X800XL vid card

Toshido · 07-02-2005, 02:47 PM

Trying to install an X800 XL card in my computer and nothing happening. No display when I plug moniter into X800...

System specs

Intel Celeron D 2.4Ghz
Asrock P4i45GV motherboard intel 845GV chipset (iirc)
400W power supply
1 gb DDR ram

Someone please help I am one step away from letting Future shop try to install it.

I ran driverclean to get rid of my old forceware drivers and am currently running computer of onboard video.

HELP!

T_BEAR · 07-02-2005, 03:35 PM

You may have to disable your onboard video directly in the bios and enable your pci/ agp slot.

**Overlag** · 07-03-2005, 06:19 AM

have you plugged the extra power cable in?

try clearing the CMOS (should be a jumper somewhere)

try the old card again, and see what happens?

Mace_UK · 07-03-2005, 06:32 AM

As stated above you need to connect to your power supply (should be a four pin molex, or match to whatever connector is on your 3D card).

If you have already done this, start up your PC with your case open and see if the fan spins on the card. If it doesn't then it could be your power supply not giving enough power. You say it's 400W but if it's not a good make then it may not be giving enough power on all voltage rails.

I had a similar problem when I installed my 6600GT and bought a 420W Enermax and now it runs no problem.

Worth looking at this first though.

Mace

Toshido · 07-04-2005, 01:13 PM

mobo was bad

so went ahed and got AMD3000+ with 6600 256mb PCI-E card. just need to re-install windows and should be happy.

07-02-2005, 02:47 PM	#1 (permalink)
Toshido Join Date: Dec 2004 Age: 34 Posts: 446	help installing X800XL vid card Trying to install an X800 XL card in my computer and nothing happening. No display when I plug moniter into X800... System specs Intel Celeron D 2.4Ghz Asrock P4i45GV motherboard intel 845GV chipset (iirc) 400W power supply 1 gb DDR ram Someone please help I am one step away from letting Future shop try to install it. I ran driverclean to get rid of my old forceware drivers and am currently running computer of onboard video. HELP!

07-02-2005, 03:35 PM	#2 (permalink)
T_BEAR Banned Join Date: Apr 2004 Location: Illinois Age: 22 Posts: 252	Re: help installing X800XL vid card You may have to disable your onboard video directly in the bios and enable your pci/ agp slot.

07-03-2005, 06:19 AM	#3 (permalink)
Overlag Join Date: May 2003 Location: NE Outer London, UK Age: 26 Posts: 1,540	Re: help installing X800XL vid card have you plugged the extra power cable in? try clearing the CMOS (should be a jumper somewhere) try the old card again, and see what happens? __________________ From Adam Webb

07-03-2005, 06:32 AM	#4 (permalink)
Mace_UK Join Date: Jun 2005 Posts: 13	Re: help installing X800XL vid card As stated above you need to connect to your power supply (should be a four pin molex, or match to whatever connector is on your 3D card). If you have already done this, start up your PC with your case open and see if the fan spins on the card. If it doesn't then it could be your power supply not giving enough power. You say it's 400W but if it's not a good make then it may not be giving enough power on all voltage rails. I had a similar problem when I installed my 6600GT and bought a 420W Enermax and now it runs no problem. Worth looking at this first though. Mace

07-04-2005, 01:13 PM	#5 (permalink)
Toshido Join Date: Dec 2004 Age: 34 Posts: 446	Re: help installing X800XL vid card mobo was bad so went ahed and got AMD3000+ with 6600 256mb PCI-E card. just need to re-install windows and should be happy.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Black Hat 2006 - DEFCON 14	Apophis	General Discussion	16	08-04-2006 11:22 PM
Taking the leap... first PC build	Mirfee	Hardware & Software Discussion	37	07-02-2006 08:25 PM
2 sound card use question?	Magnum50	Hardware & Software Discussion	0	07-16-2005 07:28 AM
Your video card performance in BF2	Syn	Battlefield 2 - General Discussion	6	06-21-2005 02:17 PM
PCI-Express to AGP bridge card	asch	Hardware & Software Discussion	10	06-10-2005 01:39 PM

Sponsored links

Sponsored links