Setting up Teamspeak binds

**asch** · 08-05-2005, 12:23 PM

Here are some instructions on setting up key binds within Teamspeak and a few that I use often. This will allow you to switch to all BF channels and mute the output while in-game.

INSTRUCTIONS

Push to Talk
Please make sure that you set a key bind to talk and do NOT use the voice-activated option.

Channel Change
1. Start Teamspeak.
2. Connect to ts.tacticalgamer.com (teamspeak server).
3. Goto settings --> key settings.
4. Click Add
5. In the action list, select switch to.
6. Leave the 2nd selection box on channel.
7. Select the channel you would like.
8. Use the set keys to set your keybind.

My channel keybinds are as follows...
a. CTRL-SHIFT-1 = Battlefield 2 (Server #1)
b. CTRL-SHIFT-2 = Battlefield 2 (Server #2)
c. CTRL-SHIFT-P = Battlefield 2 (Private)
d. CTRL-SHIFT-B = Battlefield 2 (General)

You can also bind keys to move you "up" and "down" to adjoining channels.

Away & Mute
1. Start Teamspeak.
2. Connect to ts.tacticalgamer.com (teamspeak server).
3. Goto settings --> key settings.
4. Click Add
5. In the action list, select toggle.
6. In the 2nd selection box use Away and Mute Output.

My keybinds are as follows...
a. CTRL-SHIFT-A = Toggle Away status
b. CTRL-SHIFT-M = Toggle Mute status

DrunkenSoul · 08-05-2005, 12:34 PM

nice post...after looking at that, i realized that you can also whisper to a certain person or a channel...this becomes very useful if you are in a certain channel and you want to talk to an admin or want to use a relay system

**Sabre Six** · 08-05-2005, 01:47 PM

Thanks,....I definately needed this...any other TS advice is welcome.

StrikeFear · 08-26-2005, 02:34 PM

If you get sick of hearing TS announce to you everytime someone joins the server, your channel, or picks their nose, you can turn off those notifications.

You can disable them all, but there are a couple that I actually need to hear when I'm on TS for various reasons:
1. When I (not others) switch channels
2. When I mute/unmute my mic
3. When I toggle TS sound output
4. When I (not others) connect to the server

You can do it here:

**Sabre Six** · 08-26-2005, 02:39 PM

This is good, StrikeFear. Thanks. I'm a TS dolt.

Thanks again!

**marstein** · 10-01-2005, 03:57 PM

Could someone post their bindings (I see export import buttons in the dialog)? It is lots of work setting things up.

munchkin · 10-01-2005, 06:21 PM

I won't post my bindings file, but here's what I use:
U = whisper to USMC pilots
I = whisper to OPFOR pilots
O = bind last whisperer to 0
P = whisper to 0

Shift+Alt+Numpad1 = switch username to USMC pilot 1
Shift+Alt+Numpad2 = switch username to USMC pilot 2
Shift+Alt+Numpad3 = switch username to USMC pilot 3
Shift+Alt+Numpad4 = switch username to Opfor pilot 1
Shift+Alt+Numpad5 = switch username to Opfor pilot 2
Shift+Alt+Numpad6 = switch username to Opfor pilot 3

StrikeFear · 10-02-2005, 10:28 AM

Here's mine.

ABRA · 11-14-2005, 10:05 PM

How do I set a hotkey to change my user name(USMCPilot1, etc.)?

The only way I see is to create new connections for each of the user names you wish to use (setup each connection with the TG TS server but change the name you login under) and use switch to : server?

StrikeFear · 11-15-2005, 12:10 AM

That is correct, ABRA, as described in the SOP for contacting the jet squad. (See my sig.)

-=HF=-Wraith · 12-03-2005, 02:16 PM

What push to talk buttons do you guys use?

Steel_Penguin · 12-03-2005, 02:21 PM

I use my middle mouse button. I haven't set up any other binds yet because i'm too lazy.

ABRA · 12-03-2005, 04:15 PM

I keep my mouse buttons for firing and weapon switches. All my TS binds are on the numberpad including the push to talk.

Steel_Penguin · 12-03-2005, 04:16 PM

Actually that's a good idea. I might set up my TS binds for the number pad.

Leonidas · 12-03-2005, 05:11 PM

Bah! I can't get my binds to work!(never had any before) All I get is a annoying beeping sound when I press the key/keys, and it loops when I hold them/it down. I've never had a use for TS until a few days ago, so I'm not the most knowledgeable guy around

Any ideas

?

08-05-2005, 12:23 PM	#1 (permalink)
asch Join Date: Oct 2003 Location: Fort Mill, SC Age: 33 Posts: 9,824	Setting up Teamspeak binds Here are some instructions on setting up key binds within Teamspeak and a few that I use often. This will allow you to switch to all BF channels and mute the output while in-game. INSTRUCTIONS Push to Talk Please make sure that you set a key bind to talk and do NOT use the voice-activated option. Channel Change 1. Start Teamspeak. 2. Connect to ts.tacticalgamer.com (teamspeak server). 3. Goto settings --> key settings. 4. Click Add 5. In the action list, select switch to. 6. Leave the 2nd selection box on channel. 7. Select the channel you would like. 8. Use the set keys to set your keybind. My channel keybinds are as follows... a. CTRL-SHIFT-1 = Battlefield 2 (Server #1) b. CTRL-SHIFT-2 = Battlefield 2 (Server #2) c. CTRL-SHIFT-P = Battlefield 2 (Private) d. CTRL-SHIFT-B = Battlefield 2 (General) You can also bind keys to move you "up" and "down" to adjoining channels. Away & Mute 1. Start Teamspeak. 2. Connect to ts.tacticalgamer.com (teamspeak server). 3. Goto settings --> key settings. 4. Click Add 5. In the action list, select toggle. 6. In the 2nd selection box use Away and Mute Output. My keybinds are as follows... a. CTRL-SHIFT-A = Toggle Away status b. CTRL-SHIFT-M = Toggle Mute status __________________ \| My Maps Gaming Videos by Tactical Gamers Fear the Frog! \| Kill the Frog! \| An Inconvenient Truth "Support game play in a near-simulation environment. Where the focus of play would not be solely on doing what it takes to win, but doing so utilizing real-world combat strategy and tactics rather than leveraging exploits provided to players by the design of the game engine, regardless of the level of advantage, if any, it gives over the opposing team." -- Tactical Gamer Primer Last edited by asch; 08-24-2005 at 08:32 AM.

08-05-2005, 12:34 PM	#2 (permalink)
DrunkenSoul Join Date: Jul 2005 Location: NJ/NYC Age: 22 Posts: 1,106	Re: Setting up Teamspeak binds nice post...after looking at that, i realized that you can also whisper to a certain person or a channel...this becomes very useful if you are in a certain channel and you want to talk to an admin or want to use a relay system __________________ \|TG-1stMIP\|DrunknSoul 1st Mechanized Infantry Platoon (C-Team) [medic][conduct][combat][defense] [tog-c1][ma-c1][tpf-c1][ma-c2]

08-05-2005, 01:47 PM	#3 (permalink)
Sabre Six Join Date: Jul 2005 Location: Charleston, SC Age: 37 Posts: 719	Re: Setting up Teamspeak binds Thanks,....I definately needed this...any other TS advice is welcome. __________________

08-26-2005, 02:34 PM	#4 (permalink)
StrikeFear Join Date: May 2003 Location: Austin, TX Age: 38 Posts: 1,877	Re: Setting up Teamspeak binds If you get sick of hearing TS announce to you everytime someone joins the server, your channel, or picks their nose, you can turn off those notifications. You can disable them all, but there are a couple that I actually need to hear when I'm on TS for various reasons: 1. When I (not others) switch channels 2. When I mute/unmute my mic 3. When I toggle TS sound output 4. When I (not others) connect to the server You can do it here: __________________ "You live and learn. Or you don't live long." - Lazarus Long

08-26-2005, 02:39 PM	#5 (permalink)
Sabre Six Join Date: Jul 2005 Location: Charleston, SC Age: 37 Posts: 719	Re: Setting up Teamspeak binds This is good, StrikeFear. Thanks. I'm a TS dolt. Thanks again! __________________

10-01-2005, 03:57 PM	#6 (permalink)
marstein Join Date: Jul 2005 Location: Half Moon Bay, CA, USA Age: 42 Posts: 825	Re: Setting up Teamspeak binds Could someone post their bindings (I see export import buttons in the dialog)? It is lots of work setting things up. __________________ Gigabyte P35-DS3R, 2GB, 8800GTS 640MB, Core2Duo E8400

10-01-2005, 06:21 PM	#7 (permalink)
munchkin Join Date: Jul 2005 Location: Sydney, Australia Age: 17 Posts: 2,271	Re: Setting up Teamspeak binds I won't post my bindings file, but here's what I use: U = whisper to USMC pilots I = whisper to OPFOR pilots O = bind last whisperer to 0 P = whisper to 0 Shift+Alt+Numpad1 = switch username to USMC pilot 1 Shift+Alt+Numpad2 = switch username to USMC pilot 2 Shift+Alt+Numpad3 = switch username to USMC pilot 3 Shift+Alt+Numpad4 = switch username to Opfor pilot 1 Shift+Alt+Numpad5 = switch username to Opfor pilot 2 Shift+Alt+Numpad6 = switch username to Opfor pilot 3 __________________ [conduct][volun][drill][sg-c1][tpf-c1] \|TG-2nd\|munchkin Nec aspera terrent.

11-14-2005, 10:05 PM	#9 (permalink)
ABRA Join Date: Aug 2005 Location: NORTH ATLANTIC (offline) Posts: 584	Re: Setting up Teamspeak binds How do I set a hotkey to change my user name(USMCPilot1, etc.)? The only way I see is to create new connections for each of the user names you wish to use (setup each connection with the TG TS server but change the name you login under) and use switch to : server? __________________ Xbox Live Gamertag: TG ABRA live.xbox.com/member/TG ABRA Friend me!

11-15-2005, 12:10 AM	#10 (permalink)
StrikeFear Join Date: May 2003 Location: Austin, TX Age: 38 Posts: 1,877	Re: Setting up Teamspeak binds That is correct, ABRA, as described in the SOP for contacting the jet squad. (See my sig.) __________________ "You live and learn. Or you don't live long." - Lazarus Long

12-03-2005, 02:16 PM	#11 (permalink)
-=HF=-Wraith Join Date: Nov 2005 Posts: 17	Re: Setting up Teamspeak binds What push to talk buttons do you guys use?

12-03-2005, 02:21 PM	#12 (permalink)
Steel_Penguin Join Date: Jul 2005 Location: Florida,USA Age: 20 Posts: 1,970	Re: Setting up Teamspeak binds I use my middle mouse button. I haven't set up any other binds yet because i'm too lazy. __________________ _____________________ ---

12-03-2005, 04:15 PM	#13 (permalink)
ABRA Join Date: Aug 2005 Location: NORTH ATLANTIC (offline) Posts: 584	Re: Setting up Teamspeak binds I keep my mouse buttons for firing and weapon switches. All my TS binds are on the numberpad including the push to talk. __________________ Xbox Live Gamertag: TG ABRA live.xbox.com/member/TG ABRA Friend me!

12-03-2005, 04:16 PM	#14 (permalink)
Steel_Penguin Join Date: Jul 2005 Location: Florida,USA Age: 20 Posts: 1,970	Re: Setting up Teamspeak binds Actually that's a good idea. I might set up my TS binds for the number pad. __________________ _____________________ ---

12-03-2005, 05:11 PM	#15 (permalink)
Leonidas Join Date: Nov 2005 Location: District of Columbia, U.S.A Age: 17 Posts: 493	Re: Setting up Teamspeak binds Bah! I can't get my binds to work!(never had any before) All I get is a annoying beeping sound when I press the key/keys, and it loops when I hold them/it down. I've never had a use for TS until a few days ago, so I'm not the most knowledgeable guy around Any ideas? __________________ War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling that thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety is a miserable creature, who has no chance at being free unless made and kept so by the exertions of better men than himself. -- John Stuart Mill-- "O xein angellein lakedaimoniois hoti tede keimetha tois keinon rhemasi peithomenoi"- Monument, Thermopylae

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Sponsored links

Sponsored links

Sponsored links

Sponsored links

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Teamspeak Key Binds	asch	Counter-Strike - Official Rules, Announcements and SOPs.	3	05-28-2005 12:22 PM
Teamspeak Key Binds	asch	First Person Shooters (FPS)	2	04-24-2005 04:55 PM
One More Time - BFDC Night	Killer_McDermott	First Person Shooters (FPS)	66	04-08-2005 08:48 AM
TeamSpeak Multi-Channel Protocol	=Sarc=	Joint Operations - Official Rules, Announcements and SOPs.	4	09-05-2004 11:02 PM