Widescreen Support is Available - Page 2

**LordMeatwad** · 10-31-2007, 05:37 PM

I coincidently am going to try to hook up my HDTV to my computer tonight this might be a huge help. thanks ikill!

themilkman · 11-12-2007, 02:20 PM

Ok so has anyone used the new version with success? It seems to me that the complaints were with the previous version.

I want to use my widescreen 20" monitor, the way it was meant to be used with the money I payed for it!!!

**machowner** · 11-12-2007, 04:06 PM

I think its better, you'll just have to try it out and see how it works for you.

**Reaperassault** · 11-12-2007, 05:08 PM

i've had it work fine for my 19" screen for a while now

nuckj · 11-12-2007, 07:24 PM

So which version are you guys using and having luck with?

themilkman · 11-16-2007, 04:55 AM

When I use this my framerate drops significantly, normally I get at least 40 FPS and with this I get 15-20. However that is because I have a 7300GT 128MB 128-bit GDDR3 video card, and when I use this program I change the resolution from 1024x768 to 1680x1050.

**R.Stark** · 05-31-2008, 11:55 AM

Quote:

Originally Posted by Skill4Lif3

Twas scouring the internet and found this: http://imk.cx/pc/widescreenfixer/

A program that allows 2142 to be played in widescreen mode. I'm not sure if everyone has found this, but it is working great for me and no problems so far.

Widescreen Fixer
v1.05
Copyright ©2007 David Rudie. All rights reserved.

REGARDING PUNKBUSTER
I have been communicating with EA and EvenBalance over the use of this program. I've gotten responses from both that say this program is allowed on PunkBuster-enabled servers. It's not any kind of official announcement and the use of it is subject to change. In other words, this program is OK to use for now. If anything changes regarding its usage, I will update here.

Enjoy

-Skill

Howdy everyone!!!
With the release of 1.5 patch saying it now supports wide screen format, is it necessary to be using this produce?

After installing 1.5, I went my video options and I didn't see anything new to select to widescreen, is there something else that needs to be done? Last night as we where waiting for the round to start, someone over VOIP said something like this, "you have to add a command in your BF2142 shortcut Target box to get the new Widescreen to work" , if this is correct has anyone seen a link with instruction on how to do this? any help would be great.

Cheers
R.Stark AkA Bish

sc1ence · 05-31-2008, 01:50 PM

I posted this somewhere else.

Explanation:

You need to add

+widescreen 1

To your 2142 shortcut

For example,

If I connected to the server using the 2142 shortcut that the game installs you would have a shortcut that looks something like:

"X:\Program Files\Electronic Arts\Battlefield 2142\BF2142.exe" +menu 1 +fullscreen 1"

You should change it to read

"X:\Program Files\Electronic Arts\Battlefield 2142\BF2142.exe" +menu 1 +widescreen 1"

The X in this case is the drive letter where BF2142 is located.

The "+menu 1" and "+widescreen 1" are refered to as command line arguments.

detailed instructions:

Right click on the 2142 shortcut and select properties. In the "target" text entry field of the window that pops up you will see the current shortcut and arguments.
Edit this field such that the "+fullscreen 1" reads +widescreen 1 .

Then in game you will see your widescreen resolutions.

Holy · 06-05-2008, 05:31 PM

Man. This looks intense. Do you need to have a widescreen to be able to play widescreen? lol this is probably a really dumb question to ask.

sc1ence · 06-05-2008, 06:55 PM

Those of you using Xfire to connect should look under the pull down menu Tools->Options-> then select the games tab, then select Battlefield 2142. Then in the advanced options window you see a text box where you can type in extra command line parameters:

You want to enter +widescreen 1 in that window.

**R.Stark** · 06-08-2008, 11:55 PM

Quote:

Originally Posted by sc1ence

Those of you using Xfire to connect should look under the pull down menu Tools->Options-> then select the games tab, then select Battlefield 2142. Then in the advanced options window you see a text box where you can type in extra command line parameters:

You want to enter +widescreen 1 in that window.

Once again thank you Sc1ence you are a fountain of information we are truly lucky to have you here.

**DrakenViator** · 06-17-2008, 04:06 AM

Quote:

Originally Posted by Holy

Man. This looks intense. Do you need to have a widescreen to be able to play widescreen? lol this is probably a really dumb question to ask.

No, not really...

The widescreen +1 just loads a different set of default monitor sizes or rather different resolutions. For example my monitor is 1280x1024 or a 5:4 ration (almost square) normally I would run under a 1024x768 setting as that was the 'best fit' under the old options available.

However now when I put widescreen +1 into place, 1280x1024 is listed in the supported monitor sizes so I can run native resolution for better clarity. So for widescreen you do need to have a widescreen, however the widescreen +1 offers more then just widescreen options to the list.

~ Draken

10-31-2007, 05:37 PM	#16 (permalink)
LordMeatwad Join Date: Apr 2007 Location: New Jersey Age: 27 Posts: 647	Re: Widescreen Support is Available I coincidently am going to try to hook up my HDTV to my computer tonight this might be a huge help. thanks ikill! __________________ \|TG-21\| LordMeatwad XBOX live = TG Lordmeatwad ACE Online = Lordmeatwad on Prelude B.C.U FREE GAME CLICK HERE New to TG? Start here - Ribbon Nominations! - Become a Supporting Member 21st Tactical Wiki - TG Admins Shoot first! Q-spot second!

11-12-2007, 02:20 PM	#17 (permalink)
themilkman Join Date: Oct 2007 Posts: 11	Re: Widescreen Support is Available Ok so has anyone used the new version with success? It seems to me that the complaints were with the previous version. I want to use my widescreen 20" monitor, the way it was meant to be used with the money I payed for it!!!

11-12-2007, 04:06 PM	#18 (permalink)
machowner Join Date: Apr 2007 Location: New Tazewell, TN Posts: 2,835	Re: Widescreen Support is Available I think its better, you'll just have to try it out and see how it works for you. __________________ \|New to TG? Start here\|*\|Become a Supporting Member\| "Remember to pillage BEFORE you burn!"

11-12-2007, 05:08 PM	#19 (permalink)
Reaperassault Join Date: Feb 2007 Location: In the Drug Store Age: 19 Posts: 1,969	Re: Widescreen Support is Available i've had it work fine for my 19" screen for a while now __________________ APC Pony Ribbon of love

11-12-2007, 07:24 PM	#20 (permalink)
nuckj Join Date: Aug 2007 Location: Charlotte, NC Age: 30 Posts: 426	Re: Widescreen Support is Available So which version are you guys using and having luck with? __________________ 9th MID \| 2142 Profile \| New to TG?

11-16-2007, 04:55 AM	#21 (permalink)
themilkman Join Date: Oct 2007 Posts: 11	Re: Widescreen Support is Available When I use this my framerate drops significantly, normally I get at least 40 FPS and with this I get 15-20. However that is because I have a 7300GT 128MB 128-bit GDDR3 video card, and when I use this program I change the resolution from 1024x768 to 1680x1050.

05-31-2008, 01:50 PM	#23 (permalink)
sc1ence Join Date: Feb 2007 Age: 36 Posts: 4,211	Re: Widescreen Support is Available I posted this somewhere else. Explanation: You need to add +widescreen 1 To your 2142 shortcut For example, If I connected to the server using the 2142 shortcut that the game installs you would have a shortcut that looks something like: "X:\Program Files\Electronic Arts\Battlefield 2142\BF2142.exe" +menu 1 +fullscreen 1" You should change it to read "X:\Program Files\Electronic Arts\Battlefield 2142\BF2142.exe" +menu 1 +widescreen 1" The X in this case is the drive letter where BF2142 is located. The "+menu 1" and "+widescreen 1" are refered to as command line arguments. detailed instructions: Right click on the 2142 shortcut and select properties. In the "target" text entry field of the window that pops up you will see the current shortcut and arguments. Edit this field such that the "+fullscreen 1" reads +widescreen 1 . Then in game you will see your widescreen resolutions. __________________

06-05-2008, 05:31 PM	#24 (permalink)
Holy Join Date: Apr 2008 Posts: 80	Re: Widescreen Support is Available Man. This looks intense. Do you need to have a widescreen to be able to play widescreen? lol this is probably a really dumb question to ask.

06-05-2008, 06:55 PM	#25 (permalink)
sc1ence Join Date: Feb 2007 Age: 36 Posts: 4,211	Re: Widescreen Support is Available Those of you using Xfire to connect should look under the pull down menu Tools->Options-> then select the games tab, then select Battlefield 2142. Then in the advanced options window you see a text box where you can type in extra command line parameters: You want to enter +widescreen 1 in that window. __________________

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Sponsored links

Sponsored links

Sponsored links

Sponsored links