+ Reply to Thread
Results 1 to 12 of 12
Discussion: General Forums / Hardware & Software Discussion - ati catalyst control center problems - Ok, i just finished my new computer and i installed all the drivers, windows updates,
-
12-06-2004, 10:00 AM #1
- Join Date
- Jun 2003
- Posts
- 821
ati catalyst control center problems
Ok, i just finished my new computer and i installed all the drivers, windows updates, etc etc however when i try to run the ATI Catalyst Control Center it gives me this warning...
if i click ok, the msg comes up again and i have to click ok again and then it goes away.CLI.exe - Application Error
The application failed to initialize properly (0xc0000135). click on ok to terminate toe application.
I got the drivers form the ati.com site. what should i do? is it worth fixing?
jack
-
12-06-2004, 10:18 AM #2
- Join Date
- May 2003
- Location
- Ottawa, Canada
- Posts
- 4,862
Re: ati catalyst control center problems
I'd say uninstall the drivers and control center then install them again. If you can't get into the control center, you won't be able to set stuff like anti-aliasing and anisotropic filtering.
-
12-06-2004, 10:25 AM #3
- Join Date
- Jun 2003
- Posts
- 821
Re: ati catalyst control center problems
ok i'll try that now.. And i have another problem. I installed the sound drivers, but i still cant hear anything through my headphones.. they arent muted. and suggestsions?
-
12-06-2004, 11:24 AM #4
- Join Date
- Jan 2004
- Location
- Houston, TX
- Age
- 29
- Posts
- 4,799
Re: ati catalyst control center problems
Google is king.
As for the sound card, make sure you're plugged into the right output and your headphones aren't damaged.
-
12-06-2004, 11:50 AM #5
- Join Date
- May 2003
- Location
- Miami, FL
- Age
- 41
- Posts
- 8,684
Re: ati catalyst control center problems
Good find Fenix. Now I just need to figure out why the control center insists on going out to the internet.. I hate that.
-
12-06-2004, 06:58 PM #6
- Join Date
- Jun 2003
- Posts
- 821
Re: ati catalyst control center problems
thank you fenix, i'll try that
could someone link me to a tutorial or explain anti-aliasing and anisotropic filtering, i've never understood these.
-
12-06-2004, 07:18 PM #7
- Join Date
- Jun 2003
- Posts
- 821
Re: ati catalyst control center problems
Well, there is a sound manager that i guess installed with the sound drivers, and when i play with the 3d test i can hear sound but in everything else nothing happens.
suggestions?
nevermind i found the problem.. i feel real stupid now.. I've got about 3 different pairs of headphones at the desk and i plugged the wrong one in :\
thanks for the help guysLast edited by jackel; 12-06-2004 at 08:27 PM.
-
12-06-2004, 09:54 PM #8
- Join Date
- May 2003
- Location
- Ottawa, Canada
- Posts
- 4,862
Re: ati catalyst control center problems
The Simple Antialiasing and Anisotropic Guide
That should explain everything about AA and AF including examples of the differences.
-
12-07-2004, 12:00 PM #9
- Join Date
- May 2003
- Location
- NE Outer London, UK
- Age
- 29
- Posts
- 1,540
Re: ati catalyst control center problems
install the "old" control panel version.... the CATALYST Control Center is bloat
From Adam Webb
-
12-08-2004, 12:32 AM #10
- Join Date
- May 2003
- Posts
- 669
Re: ati catalyst control center problems
I found the CCC to be absolute crap, took my system 5x longer to boot.
I use Omega's drivers exclusively, they've worked much better for me than anything of ATI's I've used. Radlinker also supplies all the setting options without, as Overlag said, "the bloat".
-
12-08-2004, 11:26 AM #11
- Join Date
- May 2003
- Age
- 28
- Posts
- 1,249
Re: ati catalyst control center problems
idk my fps with the omega drivers (4.12 betas) was about 10-15 less than the official 4.11s also the image quality was bad.........Heavily disappointed.
-
12-08-2004, 08:07 PM #12
- Join Date
- Jun 2003
- Posts
- 821
Re: ati catalyst control center problems
its actually working fine now, and so i think i'll stick with this for now.. thanks for the help.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks