Announcement

Collapse
No announcement yet.

9700pro to 9800pro mods. Split from Cobras thread

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 9700pro to 9800pro mods. Split from Cobras thread

    Originally posted by Overlag
    well you should get at least 18k

    but i bet FSAA was on and AF so maybe its a "real" test...unlike ours spectre :)

    i get 17623 with a 9700pro :)
    I get 20,300 + with a 9700Pro. ;)

    Hint...read the details 8)

    http://service.futuremark.com/compare?2k1=7220868

  • #2
    my best project was with my cpu core at 2400, it doesnt do that anymore. i dont think my best project had the OC on the gfx card...im not totaly sure, but my 2300mhz test with my gfx card at 366/333 got only 400marks lower than my best so i dunno.

    and anyway you have got a good overclock there so well done... anyluck getting that 2.6 you want for 4ghz? :)
    From Adam Webb

    Comment


    • #3
      hang on... you got your 9700pro flashed to 9800pro? why? i thought it was just a clock speed increase?
      From Adam Webb

      Comment


      • #4
        Originally posted by Overlag
        hang on... you got your 9700pro flashed to 9800pro? why? i thought it was just a clock speed increase?
        Nope...I found two sites ;)

        CAUTION...use at your own RISK!


        http://www.ocfaq.com/softmod/bios.php


        http://www.3dchipset.com/bios/index.php

        Comment


        • #5
          And I'm waiting on a system build to get a 2.8 or 3.0C to replace my 2.6C. Plus hopefully a 9800XT.

          However the customer put the system on hold...so when and if I get the parts is up in the air now... :(

          Comment


          • #6
            Originally posted by Spectre
            Originally posted by Overlag
            hang on... you got your 9700pro flashed to 9800pro? why? i thought it was just a clock speed increase?
            Nope...I found two sites ;)

            CAUTION...use at your own RISK!


            http://www.ocfaq.com/softmod/bios.php


            http://www.3dchipset.com/bios/index.php

            but still... theres no difference other than clock speed and some support for new stuff that isnt even in 3dmark2001... at least what i know

            plus your card is still detected as a 9700pro anyway......
            From Adam Webb

            Comment


            • #7
              I saw a 1700 point jump at the same clockspeeds after the flash... ;)

              Comment


              • #8
                realy? I wonder why......i have flashed my sapphire with a Low latency bios though.. that DID increase my points by about 500....
                From Adam Webb

                Comment


                • #9
                  why does it say my FBS is 210?

                  Comment


                  • #10
                    oooooooh free 10fsb overclock :D

                    Asus normaly overclock slightly by default...

                    and doh! this is the 9700/9800 thread... :P
                    From Adam Webb

                    Comment


                    • #11
                      my 9800xt needs some help i think

                      score 10138

                      http://service.futuremark.com/compare?2k1=7233175

                      Comment


                      • #12
                        thats terrible!
                        From Adam Webb

                        Comment


                        • #13
                          any suggestions?

                          Comment


                          • #14
                            okay played with some settings new score = 15877

                            details here

                            http://service.futuremark.com/compare?2k1=7234039

                            Comment


                            • #15
                              D3D
                              FSAA and AF should be set off (application preference)
                              all other bars set to best performance

                              note: this is just for 3dmark....
                              From Adam Webb

                              Comment

                              Connect

                              Collapse

                              TeamSpeak 3 Server

                              Collapse

                              Advertisement

                              Collapse

                              Twitter Feed

                              Collapse

                              Working...
                              X