Announcement

Collapse
No announcement yet.

TeamSpeak 3.0.8.1 Push To Talk Key

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [GUIDE] TeamSpeak 3.0.8.1 Push To Talk Key

    Most of you have Teamspeak version 3.0.8.1. Some of you are lucky to not have your Push-to-talk (PTT) key broken, but some of us like myself have after the update.

    I fixed my issue by following these steps, hopefully it will resolve yours too.




    A) Firstly, make sure that Teamspeak is at version 3.0.8.1, which is the current version of Teamspeak that ACRE supports.

    You can do this by going to "Help" and "About TeamSpeak 3".
    If it is not 3.0.8.1, please update by going to "Help" and "Check for Update" within TeamSpeak.

    B) Secondly, you need to set your capture options.

    There are several conditions required for ACRE:
    • Your capture mode must be set to "Push-To-Talk". Voice Activation Detection is not fully supported.
    • "Voice activation detection while using Push-To-Talk" must be turned off.
    • "Automatic voice gain control" must be turned off.
    • Your Push-to-Talk key can not be Caps Lock. It can be any other key that isn't used by Arma 2.




    Go to the "Hotkeys" tab (left side of window). On the bottom right, change the selector to "Direct Input" then press Apply or Okay.

    Exit the Settings menu.

    Check if your Push-to-talk key is working...

    TGU Instructor TG Pathfinder

    Former TGU Dean Former ARMA Admin Former Irregulars Officer

    "Do not seek death. Death will find you. But seek the road which makes death a fulfillment." - Dag Hammarskjold

  • #2
    Re: TeamSpeak 3.0.8.1 Push To Talk Key

    It's 6 months later. Is 3.0.9.2 OK now?
    sigpic
    CMWARTIME

    Comment


    • #3
      Re: TeamSpeak 3.0.8.1 Push To Talk Key

      Yes

      Comment

      Connect

      Collapse

      TeamSpeak 3 Server

      Collapse

      Advertisement

      Collapse

      Twitter Feed

      Collapse

      Working...
      X