Announcement

Collapse
No announcement yet.

Userconfig problem?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Userconfig problem?

    i have a problem with my userconfig. to wearing googles and stuff i had to change the name with my name. but ive done that with all the to names.


    /*//////////////////////////////////////////////
    //CONFIG SETTING FOR : ACE 2 MOD - Changeable glasses ingame
    //--------------------
    //FEATURES: Lets you choose different glasses
    //---------
    //TO ENABLE: Please ADD your Player Profile Name
    //----------
    //EXAMPLE:
    //--------
    //class Identity
    //{
    // name = "John Doe"; <---------------- I PUT MY NAME IN HERE
    //};
    //
    //
    //
    //
    ////////--E D I T below THIS LINE--//////////*/
    class Identity
    {
    name = "John Doe"; <---------------------- AND HERE
    };


    and i saved it then.after i read that i only have to fill the one out which i under the line --E D I T below THIS LINE-- i changed it.
    is that a problem now or is everything fine? :-)
    The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke

  • #2
    Re: Userconfig problem?

    Well to be safe just replace the upper one with John Doe again.
    "Can't waste a day when the night brings a hearse
    So make a move and plead the fifth 'cause you can't plead the first."

    Interesting Articles__________News
    tinyurl.com/PipelineGeopolitics_____prisonplanet.com
    tinyurl.com/USTrainGeorgia_______globalresearch.ca
    tinyurl.com/Rumsfeld-GeorgianDM__engdahl.oilgeopolitics.net
    tinyurl.com/Georgia3rdinIraq

    Comment


    • #3
      Re: Userconfig problem?

      yes i allready done that.i just deleted the config file in my arma 2 - userconfig folder and put the userconfig of @ACE - userconfig folder into the arma 2 userconfig folder. :-) thx for youre reply
      The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke

      Comment


      • #4
        Re: Userconfig problem?

        Uhm, NO!
        You should NEVER replace the upper "John Doe". The instructions clearly state "Edit BELOW THIS LINE". :D

        As long as you change the second "John Doe" with "TheDarkNight" (and yes, you have to keep the " " ) everything should be fine. Just remember that you should NOT modify the file in @ACE/userconfig and that you need to put the files in ArmA2/userconfig/ACE folder. As long as you do that, everything will work fine. ;)

        Example:
        Here is my clientside file

        /*//////////////////////////////////////////////
        // ___ ______ ______ ___ //
        // / | / ____/ / ____/ |__ \ //
        // / /| | / / / __/ __/ / //
        // / ___ | / /___ / /___ / __/ //
        // /_/ |_| \____/ /_____/ /____/ //
        // //
        // //
        ////////////////////////////////////////////////
        // //
        // CLIENTSIDE CONFIG FILE //
        // //
        //////////////////////////////////////////////*/


        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - NO VOICE, NO RADIO CHATTER
        --------------------
        FEATURES: Disables AI radio chatter as well as player radio chatter
        ---------
        TO ENABLE: Remove the "//" in front of the #define to enable the NO VOICE, NO RADIO CHATTER feature. To disable, think vice versa.
        ----------
        //////////////////////////////////////////////*/

        #define ACE_NOVOICE




        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - CROSSHAIRS
        --------------------
        FEATURES: Disables/Reduces crosshairs
        ---------

        Possible selections as documented in ACE2 Wiki
        //////////////////////////////////////////////*/

        #define ACE_NOCROSS




        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - CARTRIDGES STAY ON GROUND
        --------------------
        FEATURES: Adds brass and cartridges on the ground
        ---------
        TO ENABLE: Change the numbers in the following block
        ----------
        //////////////////////////////////////////////*/

        class ACE_CARTRIDGES
        {
        enabled = 1; // COMMENT: 0 - disabled, 1 - enabled
        max_cartridges = 500; // COMMENT: max. amount of cartridges on map
        max_distance = 100; // COMMENT: max. distance until cartridges become deleted by FIFO
        max_lifetime = 600; // COMMENT: lifetime of cartridges in seconds
        min_FPS = 30; // COMMENT: min. FPs when cartridges become deleted
        };




        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - SIGHT ADJUSTMENT
        --------------------
        FEATURES: Enable range adjustment on scopes with BDC (Bullet Drop Compensation)
        ---------
        TO ENABLE: Change the number(s) in the following block
        ----------
        //////////////////////////////////////////////*/
        class ACE_SIGHT_ADJUSTMENT_RIFLE_CONFIG
        {
        enable_BDC = 1; //COMMENT: 0 - Only angular units are displayed
        };




        /*//////////////////////////////////////////////
        //CONFIG SETTING FOR : ACE 2 MOD - Changeable glasses ingame
        //--------------------
        //FEATURES: Lets you choose different glasses
        //---------
        //TO ENABLE: Please ADD your Player Profile Name
        //----------
        //EXAMPLE:
        //--------
        //class Identity
        //{
        // name = "John Doe";
        //};
        //
        //
        //
        //
        ////////--E D I T below THIS LINE--//////////*/
        class Identity
        {
        name = "Merlo";
        };





        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - WIND DEFLECTION
        --------------------
        FEATURES: Enable wind deflection for bullets
        ---------
        TO ENABLE: Change the number(s) in the following block
        ----------
        //////////////////////////////////////////////*/
        class ACE_WIND_CONFIG
        {
        enable_drift = 1; //COMMENT: 1 - Enable / 0 - Disable wind drift
        //COMMENT: will be overridden by mission in MP
        };


        /*//////////////////////////////////////////////
        CONFIG SETTING FOR : ACE 2 MOD - RECOGNITION SYSTEM
        --------------------
        FEATURES: Adjust wether recognistion system is activated via SPACEBAR or MOUSEWHEEL
        ---------
        TO ENABLE: Change the number(s) in the following block
        ----------
        //////////////////////////////////////////////*/
        class ACE_RECOGNITION
        {
        Scanning_Method = 2; //COMMENT: 2 - Constant / 1 - MouseWheel / 0 - SpaceBar
        };



        //////////////////////////////////////
        // DONT EDIT BELOW HERE !!!!!! ///////
        //////////////////////////////////////
        // Dedicated server settings /////////
        //#include "ACE_serverconfig.hpp"
        //////////////////////////////////////
        // Settings for ace_sys_tracking /////
        #include "ACE_Tracking.hpp"
        //////////////////////////////////////

        ACE_CLIENTSIDE_CONFIG_VER = 1.0; //DO NOT EDIT
        As long as you put your ArmA2 username where "Merlo" (my nick) is you should be ok. Well, you might want to tone down the amount of cartridges on the ground since they are resources-intensive
        sigpic

        Now with 200% more content!

        Comment


        • #5
          Re: Userconfig problem?

          Just do this:

          http://www.tacticalgamer.com/arma-2-...ml#post1438456

          Comment


          • #6
            Re: Userconfig problem?

            Just as a note, any lines that begin with "//" or are surrounded by "/* */" are not read by the script (these are known as comments). So, I could have mine look like

            Code:
            /*//////////////////////////////////////////////
            //CONFIG SETTING FOR : My Amazing Horse
            //--------------------
            //FEATURES: Turns into a plane. Also tastes like raisins.
            //---------
            //TO ENABLE: Stroke in its mane.
            //----------
            //EXAMPLE:
            //--------
            //I'll take you 'round the universe
            ////////--E D I T below THIS LINE--//////////*/
            class Identity
            {
            name = "Ozymandias";
            };
            and it should work. There is no real reason for editing anything in there, it's just for the sake of anybody editing the file to know what the code does. The important part is the part below the commented section.

            Also, if you have just updated ace from an older version and you have changed it and you are still getting an error, check Yoma and make sure you download the latest version, and then replace all the config files with the ones you downloaded and edit them again. Sometimes the ACE team updates key configs or user config files and I don't think they will read outdated ones right. Make sure it's all up to date.

            Comment


            • #7
              Re: Userconfig problem?

              shut up woman get on my horse!!!!!



              sigpic

              Comment


              • #8
                Re: Userconfig problem?

                ive done that.I deletet the clientside file of (arma2-userconfig-ace).After that i took the clientside file of ([email protected]) and copy it into (amra2-userconfig-ace)

                /*//////////////////////////////////////////////
                //CONFIG SETTING FOR : ACE 2 MOD - Changeable glasses ingame
                //--------------------
                //FEATURES: Lets you choose different glasses
                //---------
                //TO ENABLE: Please ADD your Player Profile Name
                //----------
                //EXAMPLE:
                //--------
                //class Identity
                //{
                // name = "John Doe"; <---------------NOW I DONT EDIT THE NAME AS IVE DONE IT THE FIRST TIME
                //};
                //
                //
                //
                //
                ////////--E D I T below THIS LINE--//////////*/
                class Identity
                {
                name = "John Doe"; <-------------------- I JUST EDIT MY NAME HERE NOW
                };


                thx for yor help guys
                The only thing necessary for the triumph of evil is for good men to do nothing. - Edmund Burke

                Comment

                Connect

                Collapse

                TeamSpeak 3 Server

                Collapse

                Advertisement

                Collapse

                Twitter Feed

                Collapse

                Working...
                X