Announcement

Collapse
No announcement yet.

Console Commands

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Console Commands

    Originally posted by Tweak Guides

    Here you can find all the Battlefield 2 console commands.

    Console Commands

    To open the BF2 in-game console, press the '~' key (or the key above TAB) to open/close the console. To see the list of command categories, press the TAB key twice. To see particular sub-types, enter the start of the command press TAB twice. E.g. enter renderer, then press TAB twice to see the renderer sub-class of commands.

    The list below is the full list of console commands, however many commands don't have descriptions. We shall be adding more descriptions as they are discovered.

    Renderer Commands

    renderer.drawHud [0,1] - Turns the Heads Up Display (HUD) on or off.

    renderer.drawConsole [0,1] - Turns off access to the in-game console if set to 0.

    renderer.drawFps [0,1] - Displays the current and average frames per second (FPS) in the top left corner.

    Game Commands

    game.sayAll [string] - Says the specified text in global chat

    game.sayTeam [number] [string] - Says the specified text in team chat

    game.lockFps [framerate] - Caps the game's maximum framerate to specified number

    game.allowToggleFullscreen [0,1] - If set to 1 allows toggling of fullscreen/windowed mode

    game.toggleFullscreen - Toggles between fullscreen and windowed mode

    Demo Commands

    demo.recordDemo [demoname] - Starts recording current gameplay and saves the file as demoname.bf2demo in your \Program Files\EA Games\Battlefield 2 Demo\mods\bf2\Demos directory

    demo.stopRecording - Stops current demo recording

    demo.ShutdownDemo -

    Localprofile Commands

    localProfile.setName [name] - Sets the name for your current account

    localProfile.setNick [nick] - Sets the nickname for your current account

    localProfile.setGamespyNick [GameSpyNick] - Sets the GameSpy login name for your account

    localProfile.setEmail [email account] - Sets the email account for the current account

    localProfile.setPassword [password] - Sets the password for the current account

    localProfile.setNumTimesLoggedIn [number] - Sets the number of times the player has logged in with the current account

    localProfile.setTotalPlayedTime [seconds] - Sets the time the game has been played using the current account

    localProfile.save -

    localProfile.addDemoBookmark [ ] -

    Globalsettings Commands

    globalSettings.setDefaultUser [number] - Sets the profile to use, the first one being 0001, then 0002 etc.

    Sv Commands

    These commands are used to adjust server settings, particularly in the Serversettings.con file under your \Documents and Settings\[username]\My Documents\Battlefield 2 Demo\Profiles\[profile]\ directory.

    sv.allowNATNegotiation [0,1] -

    sv.interface -

    sv.timeBeforeRestarting [0,1] -

    sv.autoBalanceTeam [0,1] -

    sv.teamRatioPercent [0,1] -

    sv.autoRecord [0,1] -

    sv.demoIndexURL [address] -

    sv.demoDownloadURL [address] -

    sv.autoDemoHook -

    sv.demoQuality -

    sv.adminScript -

    sv.sponsorText -

    sv.sponsorLogoURL [address] -

    sv.communityLogoURL [address] -

    sv.radioSpamInterval -

    sv.radioMaxSpamFlagCount -

    sv.radioBlockedDurationTime [seconds] -

    sv.useGlobalRank [0,1] -

    sv.useGlobalUnlocks [0,1] -

    Gamelogic Commands

    gameLogic.togglePause - Toggles pausing the game.

    Settingsmanager Commands

    These commands set a range of variables. E.g. SettingsManager.boolSet GSUseObjectCache 1. The command used must match the type of variable (e.g. .boolset for Boolean variables, .IntSet for variables requiring integer input, etc.)

    SettingsManager.stringSet -

    SettingsManager.boolSet -

    SettingsManager.IntSet -

    SettingsManager.floatSet -

    SettingsManager.u32Set -

    SettingsManager.stringGet -

    SettingsManager.boolGet -

    SettingsManager.intGet -

    SettingsManager.foatGet -

    SettingsManager.U32Get -

    Inputdevices Commands

    InputDevices.setInvertAxis -

    InputDevices.setAxisScale -

    Controlmap Commands

    These settings should be used in the Controls.con file under your \Documents and Settings\[username]\My Documents\Battlefield 2 Demo\Profiles\[profile]\ directory.

    controlMap.deleteControlMap -

    controlMap.dump -

    controlMap.setButtonRiseTime -

    controlMap.SetButtonFallTime -

    controlMap.SetDoubleTapTime -

    controlMap.addAxisToAxisMapping [string] -

    controlMap.addButtonsToAxisMapping [string] -

    controlMap.addKeyAndButtonToAxisMapping [string] -

    controlMap.addKeysToAxisMapping [string] -

    controlMap.addButtonToTriggerMapping [string] -

    controlMap.AddKeyToTriggerMapping [string] -

    controlMap.setAxisScale -

    controlMap.setYawFactor -

    controlMap.setPitchFactor -

    controlMap.addAxisToTriggerMapping -

    controlMap.InvertMouse [0,1] - Set to 1 for inverted mouse, 0 for default mouse

    controlMap.mouseSensitivity [number] - Determines the sensitivity of the mouse

    controlMap.keyboardSensitivity [number] - Deterimes the sensitivity of the keyboard

    Maplist Commands

    These commands are used to manage lists of maps by server administrators.

    mapList.list - Lists map ID numbers, map name, game mode and the number of players if specified.

    mapList.configFile [new location for file] - Used to specify the location of the _mapList.con file. Default is \My Documents\Battlefield 2 Demo\ServerConfigs\

    mapList.load - Makes the server reload _mapList.con

    mapList.save - Saves the current map list on the server to the file _mapList.con

    mapList.mapCount - Shows the total number of maps in the current map list

    mapList.currentMap - Shows the map list ID number of the current map being played

    mapList.clear - Clears the current map list

    mapList.remove [map ID number] - Removes the specified map from the map list

    mapList.append [map name] [game mode] [number of players] - Add a new map to the end of the map list. You must specify the map name and game mode.

    mapList.insert [map ID number] [map name] [game mode] [number of players] - Same as mapList.append command, but with this command you can specify at what map ID number to insert the new map into the list.

    Admin Commands

    These commands are used by server administrators.

    admin.listPlayers - Lists the players connected to the server, showing their name, ID number and IP number.

    admin.runNextLevel - Forces the server to end the round and start the next map in the map list.

    admin.currentLevel - Shows the map list ID number for the current map being played.

    admin.nextLevel - Shows the map list ID number for the next map to be played.

    admin.restartMap - Restarts the current map.

    admin.banPlayer [player ID number] [timeout] - Enter the player ID number you want to ban. Bans the player from the server by using their IP address. The timeout value controls the length of the ban e.g. perm for permanent ban, round to ban them for the rest of the round, and 180 is 180 seconds (3 minutes).

    admin.banPlayerKey [player ID number] [timeout] - Enter the player ID you want to ban. Bans the player from the server by using their CD key hash.

    admin.addAddressToBanList [IP address] [timeout] - Enter the IP number you want to ban.

    admin.addKeyToBanList [CD key hash] [timeout] - Enter the CD key hash you want to ban.

    admin.removeAddressFromBanList [IP address] - Enter the IP address to remove from the ban list.

    admin.removeKeyFromBanList [CD key hash] - Enter the CD key hash you want to remove from the ban list.

    admin.clearBanList - Clears all ban lists.

    admin.listBannedAddresses - Displays a list of the currently banned IP addresses.

    admin.listBannedKeys - Displays a list of the currently banned CD keys.

    admin.kickPlayer [player ID number] - Enter the ID number of the player you want to kick.

    Remote Console

    These commands are used by server administrators.

    To setup remote console access to the server, onthe server create a new plain text document in \admin\ called default.cfg and enter the following text into the new file:

    port=4711

    password=YourPassword

    Save the file, and start the server. Now you can access the server remotely by using the following commands from a client:

    rcon login [YourPassword] - Use this command to login to the server.

    rcon users - This command lists all the users connected to the server. Very similar to admin.listPlayers

    rcon exec [command name] - Replace with a console command you would like to execute on the server. For example: rcon exec admin.kickPlayer 3

    Exit - Quits the game to desktop.
    |TG-12th| asch
    sigpic

  • #2
    Re: Console Commands

    I've added the console commands to the TG wiki:

    http://www.tacticalwiki.com/index.ph...nsole_Commands

    Basic formatting is done, but the commands and descriptions could probably be altered to be more visually pleasing.
    "Hardly used" will not fetch a better price for your brain.

    Comment


    • #3
      Re: Console Commands

      Originally posted by verbose
      I've added the console commands to the TG wiki:

      http://www.tacticalwiki.com/index.ph...nsole_Commands

      Basic formatting is done, but the commands and descriptions could probably be altered to be more visually pleasing.
      Yay! The Wiki isn't just the Squeak and Pokerface Show! :D
      [volun2]
      NS Game Officer. TF2 Admin. BF2 Admin / Scripter. PM with issues.
      Tempus: Pokerface is nailing it right on the head. Everyone who is arguing against him is simply arguing against reality.
      <anmuzi> it is not permitted to have privacy or anonymity
      <LazyEye> yeah when I play on TG the server digs though my trash

      Arm yourself with knowledge: TG NS TF2 BF2

      Comment


      • #4
        Re: Console Commands

        I haven't been able to have the rendered.drawFps 1 command run fron a .con file on startup yet, what file should i be editing?
        |TG|Syn - [defense] :row__572:

        Comment

        Connect

        Collapse

        TeamSpeak 3 Server

        Collapse

        Advertisement

        Collapse

        Twitter Feed

        Collapse

        Working...
        X